logwisp/doc/sinks.md

Output Sinks

Sinks consume core.TransportEvent values — a formatted Payload plus the original structured Entry — and deliver them somewhere. Each sink is declared as a [[pipelines.plugin_sinks]] entry with an id, a type, and a type-specific config table.

Registered types: console, file, http, tcp, null, tcp_chain, http_chain.

Dispatch into a sink is non-blocking. A sink whose input queue is full drops the event for itself only and the pipeline counts it in total_dropped_by_sink; sibling sinks are unaffected.

---

console

Writes formatted payloads to stdout or stderr. It is the sink of the built-in pipe pipeline, and of every spec pipeline given no --sink.

[[pipelines.plugin_sinks]]
id   = "stdout"
type = "console"
[pipelines.plugin_sinks.config]
target      = "stdout"
buffer_size = 1000
escape      = "auto"

Options, each as type and default:

• target (string, stdout): stdout or stderr.
• buffer_size (int, 1000): sink input queue depth.
• escape (string, auto): write control characters as <hex> of their bytes, ESC as <1b>: auto when the output is a terminal, always, or never.

split is not a valid target for this sink and is rejected at startup. Level-based splitting exists only for LogWisp's own application log (logging.output = "split").

Payloads are written as the formatter made them, one record per line.

• Escaping: a log line must not drive the terminal that shows it (cursor and screen control, title changes, OSC 52 clipboard writes, bidi spoofing). C0 and C1 controls other than tab, DEL, the bidi controls, the line and paragraph separators and invalid UTF-8 are escaped; other invisible characters, such as the joiners emoji and Indic scripts need, are kept. never keeps an application's own ANSI colours; under auto, pipes and files get the bytes unchanged.
• Backpressure: the sink never drops. When its output is slow (a slow reader, a paused terminal, a stalled log collector) the pipeline waits for it, with its other sinks. A service whose stdout may stall writes to a file sink instead. A closed stdout pipe ends lw with SIGPIPE, as it ends cat.
• On stop it writes what is queued.

---

file

Rotating file writer.

[[pipelines.plugin_sinks]]
id   = "archive"
type = "file"
[pipelines.plugin_sinks.config]
directory         = "/var/log/logwisp"
name              = "output"
max_size_mb       = 100
max_total_size_mb = 1000
min_disk_free_mb  = 0
retention_hours   = 168.0
buffer_size       = 1000
flush_interval_ms = 100

Options, each as type and default:

• directory (string, required): output directory.
• name (string, required): base filename.
• max_size_mb (int, 100): rotate when the active file reaches this size.
• max_total_size_mb (int, 1000): cap across all rotated files.
• min_disk_free_mb (int, 0): free-space floor before writing; 0 = none.
• retention_hours (float, 168.0): delete rotated files older than this.
• buffer_size (int, 1000): sink input queue depth, and the depth of the internal writer's queue, which drops and counts when full.
• flush_interval_ms (int, 100): forced flush interval.

min_disk_free_mb has an unusual default. The constructor replaces only negative values with 100; leaving the key unset yields 0, which means no free-space floor. Set it explicitly if you want one.

The sink drives an internal writer configured for raw output with timestamps and levels disabled, so what lands on disk is exactly the formatted payload. On stop it hands the writer what is queued before closing the file.

---

null

Discards everything, counting entries and bytes. Useful for benchmarking a source or flow in isolation.

[[pipelines.plugin_sinks]]
id   = "discard"
type = "null"

No options. The input queue is fixed at 1000.

---

http

Server-Sent Events stream plus a JSON status endpoint.

[[pipelines.plugin_sinks]]
id   = "sse"
type = "http"
[pipelines.plugin_sinks.config]
host               = "0.0.0.0"
port               = 8080
stream_path        = "/stream"
status_path        = "/status"
buffer_size        = 1000
client_buffer_size = 256
write_timeout_ms   = 0
max_connections    = 0

[pipelines.plugin_sinks.config.tls]
enabled        = true
cert_file      = "/etc/logwisp/tls/server.crt"
key_file       = "/etc/logwisp/tls/server.key"
client_auth    = true
client_ca_file = "/etc/logwisp/tls/client-ca.crt"

[pipelines.plugin_sinks.config.auth]
type  = "mtls"
allow = ["viewer-01"]

Options, each as type and default:

• host (string, 0.0.0.0): bind address, IPv4 or IPv6 (::); the listener keeps to its family (Networking).
• port (int, required): listen port.
• stream_path (string, /stream): SSE endpoint; must start with /.
• status_path (string, /status): status endpoint; must start with / and differ from stream_path.
• buffer_size (int, 1000): sink input queue depth.
• client_buffer_size (int, 256): per-client send queue depth.
• write_timeout_ms (int, 0): per-event write deadline; 0 = none.
• max_connections (int, 0): concurrent stream cap; 0 = unlimited.
• login_page (bool, false): serve the browser login page at /auth/login; needs auth.trusted_proxies.
• viewer_page (bool, false): serve a minimal live viewer at /auth/view; needs login_page.
• tls (table): listener TLS; see Security.
• auth (table): client authentication (mtls or scram); see Security.

Behaviour

• Only GET is routed to either path; anything else gets 405, HEAD on stream_path included — a stream is a body, and a client registered to have its body discarded never reads and never leaves.
• With an auth block, one middleware gates both endpoints, with no body detail in a refusal. Under mtls a refused certificate gets 403. Under scram a client logs in at POST /auth, which sits outside the gate (see lw auth token), and sends Authorization: Bearer <token>; a missing, invalid or expired token gets 401 with WWW-Authenticate, a certificate that does not match the token's user 403. A stream is checked when it connects and outlives its token; a reload ends it. /auth and every path under it are reserved.
• With auth.trusted_proxies (proxy mode) the sink sits behind a site's TLS-terminating reverse proxy: only the proxies may connect, browsers log in through /auth/login or the site's own copy of /auth/scram.js, and stream and status also accept the logwisp_session cookie. See Browsers behind a TLS-terminating proxy.
• Refusals are logged at WARN and counted in auth_rejected. The authorized identity is recorded in the client's session as auth_method / auth_identity.
• On connect the client receives an event: connected frame carrying its client id, session id, sink instance id, endpoint paths, and buffer size.
• Payloads are framed per the SSE spec, one data: line per line break in the payload (CRLF, LF or a lone CR), so multi-line entries stream correctly and no entry can inject an event:, id: or retry: field.
• The server sets no WriteTimeout (that would kill long-lived streams); per-write deadlines come from write_timeout_ms via http.ResponseController and cover the connected frame, every payload, and the idle comment.
• A quiet stream emits an SSE comment every 15 s. It refreshes the client's session and is how a peer that stopped reading is noticed.
• A client whose send queue is full has that event dropped (dropped_writes); it is not disconnected. A dropped_writes that rises while no client is behind is a burst larger than client_buffer_size, not backpressure: size the queue at or above whatever burst the pipeline's rate_limit releases at once.
• A client is registered only once its connected frame has flushed, so the broker never queues into a buffer whose reader has not started.
• Clients whose session has been idle-expired by the session manager are evicted by the broker. With the idle comment above, that reaches only a peer that has stopped accepting bytes on a sink configured write_timeout_ms = 0.
• On shutdown, connected clients receive event: disconnect / data: {"reason":"server_shutdown"}. Entries still queued for them are not flushed first, so a client can miss the last ones of a finite input (To Do).
• HTTP/2 is negotiated via ALPN when TLS is enabled; plaintext is HTTP/1.1.

Status endpoint returns service and version identity, host, port, TLS flag, the compiled auth policy, active client count, sink and per-client buffer sizes, connection limit, write timeout, uptime, endpoint paths, and the total_processed / dropped_writes / rejected_clients / auth_rejected counters.

Statistics: dropped_writes, rejected_clients, auth, auth_allowed, auth_rejected; under scram also auth_users, auth_throttled, auth_busy, auth_binding_mismatch and auth_token_lifetime_ms, and in proxy mode auth_trusted_proxies.

Without an auth block both endpoints are unauthenticated, and the stream response carries Access-Control-Allow-Origin: *, so any web origin can read it. With one, the header is omitted. Set an auth block, bind to a trusted interface, or put an authenticating reverse proxy in front.

---

tcp

Broadcasts formatted payloads to every connected TCP client.

[[pipelines.plugin_sinks]]
id   = "tap"
type = "tcp"
[pipelines.plugin_sinks.config]
host                 = "0.0.0.0"
port                 = 9090
buffer_size          = 1000
client_buffer_size   = 256
write_timeout_ms     = 5000
keep_alive           = true
keep_alive_period_ms = 30000
max_connections      = 0

[pipelines.plugin_sinks.config.tls]
enabled        = true
cert_file      = "/etc/logwisp/tls/server.crt"
key_file       = "/etc/logwisp/tls/server.key"
client_auth    = true
client_ca_file = "/etc/logwisp/tls/client-ca.crt"

[pipelines.plugin_sinks.config.auth]
type  = "mtls"
allow = ["viewer-01"]

Options, each as type and default:

• host (string, 0.0.0.0): bind address, IPv4 or IPv6 (::); the listener keeps to its family (Networking).
• port (int, required): listen port.
• buffer_size (int, 1000): sink input queue depth.
• client_buffer_size (int, 256): per-client send queue depth.
• write_timeout_ms (int, 5000): per-write deadline.
• keep_alive (bool, true): TCP keep-alive on accepted connections.
• keep_alive_period_ms (int, 30000): keep-alive idle period.
• max_connections (int, 0): concurrent connection cap; 0 = unlimited.
• tls (table): listener TLS.
• auth (table): client authentication (mtls or scram); see Security.

Behaviour

• The sink is write-only. Each connection also runs a reader that discards inbound bytes; it exists to detect disconnects and to refresh session activity when a client sends anything. Under scram the client must log in first: a hello carrying the login, then challenge, proof and final, all within 10 s, after which the stream follows on the same connection. nc and openssl s_client cannot do this; use lw auth stream.
• A write that misses its deadline means the kernel buffer stayed full for the whole timeout, so the client is disconnected immediately rather than retried.
• A client whose send queue is full has that event dropped (dropped_writes) and stays connected.
• On shutdown, entries still queued for clients are not flushed first, as with the http sink.
• With TLS enabled the handshake runs under a 10 s bound after the max_connections check, so concurrent handshakes are bounded too.
• With an auth block, authorization runs after that handshake and before registration, so an unauthorized client never enters the client map and never receives a broadcast. Its connection is closed, the rejection logged at WARN, and rejected_conns incremented.

Statistics: write_errors, dropped_writes, rejected_conns, tls_handshake_errors, auth, auth_allowed, auth_rejected; under scram also auth_users, auth_throttled, auth_busy and auth_binding_mismatch.

---

tcp_chain

Forwards structured entries to a downstream LogWisp tcp_chain source over one persistent connection. See Chaining.

[[pipelines.plugin_sinks]]
id   = "to_relay"
type = "tcp_chain"
[pipelines.plugin_sinks.config]
host                 = "relay.internal"
port                 = 15801
node                 = "edge-01"
buffer_size          = 1000
dial_timeout_ms      = 5000
write_timeout_ms     = 5000
backoff_min_ms       = 500
backoff_max_ms       = 30000
keep_alive           = true
keep_alive_period_ms = 30000

[pipelines.plugin_sinks.config.tls]
enabled   = true
ca_file   = "/etc/logwisp/tls/ca.crt"
cert_file = "/etc/logwisp/tls/client.crt"
key_file  = "/etc/logwisp/tls/client.key"

Options, each as type and default:

• host (string, required): downstream host or address; an IPv6 one goes bare (::1).
• port (int, required): downstream port.
• node (string, os.Hostname()): origin label stamped on first-hop entries.
• buffer_size (int, 1000): sink input queue depth.
• dial_timeout_ms (int, 5000): TCP connect timeout.
• write_timeout_ms (int, 5000): per-write deadline.
• backoff_min_ms (int, 500): reconnect backoff floor.
• backoff_max_ms (int, 30000): reconnect backoff ceiling.
• keep_alive (bool, true): TCP keep-alive.
• keep_alive_period_ms (int, 30000): keep-alive idle period.
• tls (table): dialer TLS; cert_file/key_file present a client identity.
• auth (table): server identity pinning (mtls) or a login (scram); see Security.

Behaviour

• The connection is established lazily, so pipeline start does not depend on the downstream being up.
• Under scram the hello carries the login, and the link counts as established only once the server's final message proves it holds the user's verifier. The exchange is bounded at 10 s and cut short by shutdown. A refusal — authentication failed, authentication not enabled, no challenge within 10s — is logged at WARN as Chain connect refused on every attempt; other connect failures log at DEBUG. Both retry under the normal backoff.
• Each entry is serialized as one canonical JSON line. Delivery holds the line across reconnects until it is written or the process shuts down, with exponential backoff plus ±20 % jitter between attempts. The delay keeps growing until a link outlives backoff_min_ms, so a source that drops every link right after accepting it is not retried in a tight loop.
• A source never writes once a link is up, so the sink watches each link: a line from the source is a refusal (a sink without scram facing a scram source), logged at WARN as Chain link refused; EOF ends the link at once instead of at the next failed write.
• Because delivery blocks the sink's run loop during an outage, back-pressure surfaces as a full input queue and is counted by the pipeline as total_dropped_by_sink.
• With TLS, dial and handshake are bounded together by dial_timeout_ms + 10 s.
• Events arriving without a structured entry are wrapped from the formatted payload and counted in synthesized.

Under mtls the policy pins the server's identity as part of the handshake, so a server it rejects is refused like a failed login above.

Statistics: target, node, tls, auth, connected, reconnects, write_errors, synthesized; under scram also auth_username, auth_failures and last_auth_error (empty after a successful login).

---

http_chain

Batches structured entries as NDJSON and POSTs them to a downstream LogWisp http_chain source.

[[pipelines.plugin_sinks]]
id   = "to_collector"
type = "http_chain"
[pipelines.plugin_sinks.config]
host               = "collector.internal"
port               = 15802
ingest_path        = "/ingest"
node               = "edge-01"
buffer_size        = 1000
max_batch_count    = 100
max_batch_bytes    = 1048576
flush_interval_ms  = 1000
request_timeout_ms = 10000
backoff_min_ms     = 500
backoff_max_ms     = 30000

[pipelines.plugin_sinks.config.tls]
enabled   = true
ca_file   = "/etc/logwisp/tls/ca.crt"
cert_file = "/etc/logwisp/tls/client.crt"
key_file  = "/etc/logwisp/tls/client.key"

Options, each as type and default:

• host (string, required): downstream host or address; an IPv6 one goes bare (::1).
• port (int, required): downstream port.
• ingest_path (string, /ingest): endpoint path; must start with /.
• node (string, os.Hostname()): origin label stamped on first-hop entries.
• buffer_size (int, 1000): sink input queue depth.
• max_batch_count (int, 100): flush after this many entries.
• max_batch_bytes (int, 1048576): flush after this many bytes (1 MiB).
• flush_interval_ms (int, 1000): flush after this long.
• request_timeout_ms (int, 10000): covers dial, write, and response.
• backoff_min_ms (int, 500): retry backoff floor.
• backoff_max_ms (int, 30000): retry backoff ceiling.
• tls (table): dialer TLS; cert_file/key_file present a client identity.
• auth (table): server identity pinning (mtls) or a login (scram); see Security.

Behaviour

• Delivery is at-least-once per batch: a retried batch can be delivered twice if the first attempt succeeded but the response was lost.
• Retries apply to transport errors, 408, 429, and 5xx. Any other non-2xx response is treated as permanent, and the batch is dropped and counted in dropped_batches. A retry is logged at WARN, a dropped batch at ERROR.
• Under scram the sink logs in at POST /auth whenever it holds no token and sends Authorization: Bearer <token>. A failed login is retried like a transport error, holding the batch. The token is renewed ahead of its expiry; a 401 on ingest (the source reloaded) drops it and the retry logs in again. A 403 is permanent. A connection presenting a certificate other than the one the login was bound to drops token and pin, and the retry logs in anew. A sink without scram facing a scram source gets 401 and drops every batch.
• Redirects are never followed; a 3xx is permanent too. Following one would resend the batch wherever the response points, plaintext http included.
• HTTP/2 is off by design; batched NDJSON POSTs gain nothing from it.
• On shutdown a single best-effort flush of the pending batch is attempted.

Statistics: target, node, tls, auth, batches_sent, request_errors, dropped_batches, synthesized; under scram also auth_username, auth_failures and last_auth_error.

---

Sink Statistics

Every sink reports: id, type, total_processed, active_connections, start_time, last_processed, and a type-specific details map. The DEBUG status report spreads details into each plugin's line.