logwisp/doc/configuration.md

Configuration Reference

LogWisp is configured with TOML. A complete annotated file listing every option and its default ships as config/logwisp.toml.

Configuration Precedence

• Pipelines come from the first of these that defines any, replacing the rest wholesale:
  1. pipeline flags: --source, --sink, ... (CLI)
  2. pipeline variables: LOGWISP_SOURCE, ... (CLI)
  3. the file's [[pipelines]]
  4. the built-in pipe pipeline (CLI)
• Every other key merges, highest priority first:
  1. command-line flags
  2. environment variables
  3. configuration file
  4. built-in defaults

File Location

The path is resolved before any other configuration is read:

1. -c <path>, --config <path>, or their =<path> forms (last one wins)
2. $LOGWISP_CONFIG_FILE, joined onto $LOGWISP_CONFIG_DIR when both are set
3. $LOGWISP_CONFIG_DIR/logwisp.toml
4. ~/.config/logwisp/logwisp.toml, if it exists
5. ./logwisp.toml

A file named by -c or a variable must exist (exit code 2); a missing discovered one is not an error, and lw runs on built-in defaults. A relative path that climbs with .. is refused; give it absolute. A file may hold at most 10 MiB.

Global Settings

Top-level keys, each as type and default:

• quiet (bool, false): disable all application logging and console diagnostics; pipeline output still flows. It overrides every logging setting.
• status_reporter (bool, true with a configuration file, false without): a status report every 30 s, shown only at logging.level = "debug".
• auto_reload (bool, false): watch the config file and reload pipelines on change.
• color (string, "auto"): level names in color on console sinks, which may set their own: "auto" (a terminal, NO_COLOR unset, TERM not dumb), "always" or "never"; see the console sink.

--version, --check, --dump, --schema and --tui are switches, not settings; the matching variables are ignored.

Application Logging

This configures LogWisp's own operational log, not the log data it transports. It goes to stderr by default, so stdout carries only a console sink's data.

[logging]
output = "stderr"      # file | stdout | stderr | split | all | none
level  = "info"        # debug | info | warn | error; warn without a file
format = "txt"         # raw | txt | json
# sanitization = ""    # raw | json | txt | shell

[logging.file]
directory         = "./log"
name              = "logwisp"
max_size_mb       = 100
max_total_size_mb = 1000
retention_hours   = 168.0

output modes:

• file: files only.
• stdout: standard output only.
• stderr: standard error only.
• split: DEBUG/INFO to stdout, WARN/ERROR to stderr.
• all: files plus split console.
• none: no application logging.

[logging.file] applies only to the file and all modes. Its limits delete any .log file in directory, lw's or not: give lw a directory of its own. retention_hours = 0 keeps files. The stdout, split and all modes mix the log into a console sink's stdout. [logging.console].target is validated (stdout, stderr, split) but not applied: logging.output chooses the console.

Pipeline Configuration

[[pipelines]]
name = "app"                       # required, unique across pipelines

# --- flow: everything between sources and sinks ---
[pipelines.flow.rate_limit]
entries_per_second   = 1000.0
burst_entries        = 2000.0
policy               = "drop"
max_entry_size_bytes = 65536

[[pipelines.flow.filters]]
type     = "include"
logic    = "or"
patterns = ["ERROR", "WARN"]

[pipelines.flow.format]
type             = "json"
sanitizer_policy = "json"

[pipelines.flow.heartbeat]
enabled     = true
interval_ms = 30000

# --- sources: one or more ---
[[pipelines.plugin_sources]]
id   = "app_logs"                  # unique among the pipeline's sources
type = "file"
[pipelines.plugin_sources.config]
directory = "/var/log/myapp"

# --- sinks: one or more ---
[[pipelines.plugin_sinks]]
id   = "sse"
type = "http"
[pipelines.plugin_sinks.config]
port = 8080

Every source and sink is a plugin instance with three keys:

• id: instance identifier, unique among the pipeline's sources, and among its sinks; appears in logs and stats.
• type: registered plugin type.
• config: plugin-specific table; see Sources and Sinks.

config_file on a source or sink is accepted and ignored.

Flow stages

Every stage is optional:

• flow.rate_limit: see Rate limiting.
• flow.filters: see Filters.
• flow.format: defaults to raw; see Formatters.
• flow.heartbeat: see Heartbeat.

Rate limiting

Options, each as type and default:

• entries_per_second (float, 0): 0 disables the limiter; a negative value is refused.
• burst_entries (float, entries_per_second): token bucket capacity.
• policy (string, pass): pass or drop, in lower case like every enum. drop discards entries over the rate or the size cap; pass lets everything through.
• max_entry_size_bytes (int, 0): per-entry byte cap; 0 = unlimited.

The limiter, its size cap included, acts only with entries_per_second > 0 and policy = "drop".

Heartbeat

Options, each as type and default:

• enabled (bool, false): enable heartbeat generation.
• interval_ms (int, 1000): interval; minimum 100.
• include_timestamp (bool, false): false writes the level only, no timestamp; the raw format shows neither.
• include_stats (bool, false): add type = "heartbeat", beat_count and, from the second beat, the measured interval_ms as fields.
• format (string, txt): txt, json or raw; no effect: heartbeats go through the flow's format.

Heartbeats are ordinary entries with source heartbeat and level INFO. They are generated after the flow's filter and rate-limit stages, so filters do not suppress them, and they reach every sink in the pipeline.

Environment Variables and Flags

Every setting is also a variable and a flag by its path: logging.level is LOGWISP_LOGGING_LEVEL and --logging.level. Pipelines are not: their flags and variables replace the file's whole, and an array-indexed path such as --pipelines.0.name=x is an unknown option (exit code 2). See CLI and Environment Variables.

Validation

The configuration is checked offline when it loads, at every reload and by lw --check. Each check reports the first problem of each table (the top level, logging, each flow stage, each source and sink) by its key's path:

Error: Failed to load config: invalid configuration:
pipelines[0].flow.rate_limit.policy: must be one of pass, drop, got "Drop"
pipelines[0].plugin_sinks[http].config: unknown key "tls.enabeld"

• Pipeline flags and variables come first, alone: their syntax and keys (--rate-limit entries_per_second=1,polcy=drop: unknown key "polcy").
• Settings: the color enum and the logging ones (output, level, format, sanitization, console.target).
• Pipelines: at least one; names set and unique; a source and a sink each; ids unique among a pipeline's sources and among its sinks; one console source in the whole configuration.
• Plugin options are decoded in full: unknown keys at any depth, kinds, required keys, enums, ranges, paths, and the tls, auth and acl rules of the plugin's side; a tls table's rules only when it is enabled.
• Enums are case-sensitive: policy = "Drop" and target = "STDERR" are refused.
• In plugin options and flow stages, 0, or "" for a string, takes the key's default, or the meaning its help gives zero (off, none, unlimited). A number below its key's minimum is refused, a negative one included where zero means the default (buffer_size = -1).
• Flow stages are checked whether enabled or not: kinds, enums and ranges, and filter patterns must compile (Filters).
• auth enums (identity, node_binding) are checked whatever type is; a block naming peers or credentials with type none or unset is refused (Security).
• Once the rest is valid, the file itself: the first key the schema does not declare outside a plugin's config is refused (config file "…": unknown key "pipelines[0].plugin_sinks[0].confg"), since a misspelled table path would drop the whole table it heads. A top-level config_file, version, check or dump is ignored.
• Files a plugin names (certificates, keys, CA files, credentials, password files) are read when it is built: at start, at reload and by lw --check. Those failures name the pipeline and plugin.

Two listeners on one port pass validation; the second fails at bind and lw exits 1 (Networking).

Hot Reload

auto_reload = true watches the configuration file. SIGHUP or SIGUSR1 rereads it even when watching is off and always rebuilds, so certificates and credentials rotate without a TOML edit. CLI and environment overrides, pipelines included, are captured at startup and keep their precedence. A discovered default file that does not exist is not an error, so an instance configured by flags or variables alone still rebuilds; once read, though, its removal fails the reload and the running service stays as it is; restart to run without the file.

Reload builds a new service from a detached snapshot of the configuration, validated again, and shuts the old one down only if that succeeds: parse, validation and construction errors leave the running service intact. Listener bind failures occur after the old service has stopped and can leave lw without working pipelines; correct the file and signal again.

Watch errors (deletion, permission changes, timeout) are logged without rebuilding. Queued changes are combined, and unchanged pipelines and status settings do not trigger another rebuild. Removed file keys fall back to the remaining sources on the next successful load.

• Reloaded: pipelines, sources, sinks, flow stages, status_reporter, color
• Not reloaded: logging.* (applied once at startup), quiet, auto_reload (the watcher is not restarted)

The rebuild is total: listeners close and reopen, every connected client is disconnected, and chain sinks reconnect on their own backoff schedule.

Type Reference

Each TOML type, its Go type, and its command-line / environment form:

• String (string): plain text.
• Integer (int64): decimal string.
• Float (float64): decimal string.
• Boolean (bool): true / false, or a bare flag for true.
• Array ([]T): only in pipeline specs, as a repeated key.
• Table (struct): nested path with . (flags) or _ (environment).

Integer keys refuse fractions and out-of-range values; number keys refuse inf and NaN. Configuration files are TOML only.